• BACCI ATLANTIS CNC ŞERİT TESTERE MAKİNASI
  • 56dd61e99853440231f2e270b2052b44-jpg.png
  • 60ab491528f9ed15e6a835365d963a20-jpg.png
  • a788aecafc6b4bc995f7d4bc87e357db-jpg.png
  • 17ccedcbb0b93d06aaf6479e900bf93c-jpg.png
  • 0045a44fa8693d37105f58b0e1080c26-jpg.png

The ATLANTIS numerically controlled cutting center is equipped with 3 interpolated axes (X, Y, C) to create curved cuts on pieces of any size.

As precise and versatile as a CNC machine.

As productive as a line machine.

As simple to use as a traditional machine.

 

Technical data:

C axis blade rotation

± 90°

Cutting length

0 ÷ 1,500/2,500 mm

Loading depth

1,350/1,500mm

Cutting depth

750 mm

Cutting height

0 ÷ 150 mm

Minimum cutting radius

50 mm*

Feeding speed

0 ÷ 25 m/min

* based on the blade equipped

WORKING TABLE WITH CLAMPS

Working table with 2, 4 or more pneumatic clamps for handling panels. This working table has bi-directional movements along X and Y (one to reposition the clamps between one cut and the next and one that is interpolated with the other axes during cutting operations). Sawable panels 2,500 x 1,350 (optional 1,500) x 150 mm.

REMOVABLE MOTORIZED CARRIAGES

ATLANTIS may be equipped with a special system of motorized and controlled carriages that are applied above the panel support bars. Using this system, the pieces are blocked by 2 small sideways conveyor belts (patented), as shown in the photo. This system is recommended for cutting solid wood. As they are independent, the conveyor belts also allow the operator to eliminate knots in solid wood panels (in manual mode).

OMNIWHEEL PRESSURE ROLLERS

ATLANTIS may also be equipped with "Omniwheel" pressure rollers useful to hold stacked wood panels.  The Omniwheel exerts the pressure required to hold the stack of panels in the cutting area.

ROTATING BLADE GUIDE

ATLANTIS is equipped with 2 servo-driven steel blade guides, one opposite the other in gantry configuration for a blade rotation of up to +/-90°.The rotating blade can cut contours and shapes up to a minimum radius of 65 mm (depending on the type of blade used).

CONVEYOR BELT

ATLANTIS may be equipped with a single or double conveyor belt to collect the machined pieces after they have been cut.

AUTOMATIC LOADER (optional)

ATLANTIS may be equipped with an automatic loading system for palletized panels. Load size may be customized based on customer requests.