ARTIST.TGV is the machining center with 6 axes belonging to the ARTIST series with 2 independent TGV-type working tables (a BACCI patent). ARTIST.TGV is equipped with one T2+2-type operating head. A machine that is suited to any type of machining operations: elements for furniture, chairs, sport equipment, musical instruments, plastic and composite materials. The most flexible of BACCI machining centers

Technical data

TGV TABLES

Variable geometry tables (a Bacci patent). The support surface of each working table is composed of two rails with adjustable c/c distance. The rails are made of steel to ensure proper rigidity during even the heaviest machining work, long service life and constant precision. The rails are designed to bring the vacuum suction inwards, and M8 holes to fix the templates are provided at 50 mm c/c distance. Dovetail guides are provided along all the edges of the rails to block and move pneumatic clamps, stops, suction cups and other equipments.

FREE-JIG DEVICE

The TGV-type (a Bacci patent) steel rails may be equipped with a series of Free-Jig clamps with adjustable height and tiltable, to load curved elements without the need for complex jigs. The Free-Jig device is also equipped with pop-up reference stops.

NC LATHE

The TGV-type (a Bacci patent) steel tables may be equipped with a numerically controlled turning lathe device to perform interpolated 5 axes lathing work. The numerically controlled turning lathe device may be used both in positioning mode (the axis does not rotate during machining, but positions itself on the face that had to be machined) or in interpolated mode (the axis rotates during machining, interpolating the other machine axes together). The standard length is 1,100 mm or 1,300 mm with a maximum diameter of 200 mm (other sizes are optional).

T2+2 HEAD TYPE

A single fork holding two double-exit electric spindles placed in cross position and extremely compact. The opposite exits of the same spindle rotate in opposite directions.

AUTOMATIC LOADER/UNLOADER

Machine productivity is optimized thanks to the extremely rapid loading and unloading time of only 3.5 seconds, using the automatic hopper feeder (a Bacci patent) that loads and unloads pieces simultaneously.Machined pieces are unloaded at a height of 1,200 mm from the ground, ensuring the full ergonomics of piece recovery.Max. section of automatically loaded pieces 100x60mm (different on request). The hopper feeder magazines slide on linear guides for easy parking outside the work area in case of manual loading/unloading of pieces.