A substantially built but compact free standing power feed resaw fitted with the all new RFT200 'flexi feeder' system.

As standard the machine is equipped with a 15hp main motor, top and bottom saw guide system with rack adjustment of the top guides along with a sawblade tensioning indicator.

The RTF feed system has variable and fully adjustable feed speeds through an inverter from 1 to 28m/min.

The feed arm, which as standard has 2 x serrated steel feed rollers fitted, has automatic pneumatic opening activated when a sensor on the infeed detects the end of the timber.

The initial feed in speed can be controlled independently to the feed cutting speed thus meaning you achieve a smooth entry and then speeding up as required to the set speed.

On the the standard feed rollers can be complimented by a rubber covered roller for angled cuts or 2 x 45 degree steel rollers for diagonal cuts.

The machine is also fitted with various safety features including pneumatic brake and infeed safety trip cable.

• 20 hp motor
• Hand oporated saw blade tensioning
• Automatic saw blade tensioning
• Capacity fence to sawblade 500mm (without inclination)
• Piece return conveyor with cleaning brush
• Piece return conveyor
• Feed spped 0-40mt/m
• Removeable feeder shaft
• Larger cutting height 500mm
• Blade speed up to 60mt/seck with 15kw inverter
• Additional cast iron feed roller 200mm dia
• Steel driving rubber covered roller
• Steel driving runner covered roller for transversal cuts 0-45 degrees
• Couple of conical steel driving rollers for diagonal cuts
• Stand alone roller tables 1000 x 800 per/m
• Digital displaty for feeders RTF fence
• Gital ammeter for main motor
• Additional steel resaw blade steel 5530 x 80 x 0.8 pitch 16
• Stellaite saw blade 5530 x 80 x 0.8

Pulley dia 800mm.

Table height from floor 960mm.

Main motor 15Hp.

Star delta starting.

Top and bottom saw guides.

Rack adjustment to top guides.

Max. blade width 80mm

Max. / min. blade length 5530mm - 5380mm

Max. cutting height 400mm.

Max. fence to blade clearance 400mm (500mm on request).

Max. feed roller to blade clearance 200mm.

2 x serrated feed rollers each 200mm dia x 50mm in thickness

Right side roller fence tilting up to 45 degrees (300mm height).

Adjustable feed speeds through inverter 1 to 28m/min.

Blade lubrication.